Get Started; Power Supply; Turn On - Philips SB8600 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Power supply

Either AC power or battery can be used as
power supply of this product.
Option 1: AC power
Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the speaker.
•
Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Connect the power adaptor to:
• the DC IN socket at the back of the
speaker.
• the wall outlet.
Option 2: Battery power
The speaker can also be powered by the built-
in rechargeable battery.
Note
•
Rechargeable battery has a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
•
It takes you approximately five hours to fully charge
the battery.
To charge the built-in battery:
• Connect to AC power supply.
When powered by AC mains:
System Battery status
status
On Under charging
Fully charged
Off Under charging
Fully charged
When powered by the built-in battery:
System Status Power LED status
On Solid white (Full battery)
Flashing red (Low battery)
Off Off

Turn on

Press and hold for one second.
» The button lights up.
» The Bluetooth indicator flashes white.
Turn off
Press and hold for one second again.
» The speaker is turned off.
The speaker is turned off automatically in the
following situations:
• Msic playback through Bluetooth or
external devices is stopped or paused for
15 minutes;
• There is no phone call for 15 minutes; or
• The volume level is 0 for 15 minutes.
Power LED
status
Flashing white
Solid white
Solid red
Off
EN
5