Canon Pixma iP6700D Direct Printing Manual page 21

(1) Ensure that the device is turned off.
(2) Connect the camera to the printer using the USB cable (for connection to a computer) supplied with
the device.
Some types of the PictBridge compliant devices turn on automatically when connected to the
printer. If the device does not turn on automatically, turn it on manually.
(3) Turn on and set up the device for direct printing.
When the connection between the device and printer has been established, the POWER lamp
on the printer flashes twice.
* The power-on sequence may differ depending on the model or brand of the device.
will appear on the LCD display of the device when the printer is correctly connected.
Confirming or Changing the device Settings
To change the paper size or paper type, operate the device to select the PictBridge print setup mode and
confirm or change the settings.
The settings below can be changed by pressing the Settings button when the device is connected.
However, changes can be made on the print setting screen only when the corresponding items below are
in the Default (selections based on the printer setting) using the controls of the device.
PictBridge compliant device setting items
Paper size: Default
Paper type: Default
Layout: Default
Image Optimize: Default
20
Printer setting on the Print setting screen
You can change the printer settings of (1), (2),
and (4) on tab1.
See "Print Setting Items" on page 15.
You can change the printer settings on tab2.
See "Print Setting Items" on page 15.