Load The Paper - Canon Pixma iP6700D Direct Printing Manual

Loading the Print Media in the Auto Sheet Feeder
In this example, description is provided using Photo Paper Plus Glossy 4" x 6"/101.6 x 152.4 mm in
your printer.
See "Media Types for Card Direct Printing" on page 13 for compatible paper.
1 1 1 1
Flatten the four corners of the paper before loading it.
If the paper is curled, gently bend the corners in the opposite direction until the paper becomes
completely flat. See "Back of Paper is Smudged/Paper Does Not Feed Properly/Printed Surface
is Scratched" on page 37.
2 2 2 2
Prepare to load the paper.
1
2
(2) 1. Put your fingers in the notches in either side of the paper output tray and pull down to
open it.
2. Pull out the paper output tray extension completely.
3 3 3 3

Load the paper.

(3) Pinch the paper guide and slide it against the left side of the
paper stack.
2
1
(1) 1. Open the paper support.
2. Pull out the paper support
extension to support the paper.
Auto sheet feeder lamp
(3) Press the Feed Switch button
so that the auto sheet feeder
lamp lights.
Load limit mark
Do not load the stack of paper beyond this load
limit mark.
(1) Load the paper into the auto sheet
feeder with the print side facing UP.
(2) Align the paper stack against the
cover guide on the right side of the
paper support.
Ensure that the cover guide stands
when you load paper in the auto
sheet feeder.
9