Default Key Assignments For Dolphin Hal And Supernova Version 5.X; Physical Button Layout - Optelec Braille Voyager 44 User Manual

Tieman Braille Voyager
4 Default key assignments for Dolphin Hal and
Supernova version 5.x
The following lists show the default keys to press for each Braille operation.
In the following list, T1 to T4 refer to the four thumb keys on the front of the Braille
Voyager, B1 to B8 refer to the Braille keys one to eight on top of the unit, and Nav
left, Nav right, Nav up, and Nav down refer to the Windows Navigation Key. The
Windows navigation key is the four-way key in the middle on front of the unit.

4.1 Physical button layout

Top B7 (CTL) B3 B2 B1 B4 B5 B6 B8 (ALT)
Front T1 T2 NAV T3 T4
Action = key press
Open Control Panel = B1 + B2 + B3 + B4 + B5 + B6
Speak Keys Where am I? = B2 + B4
Speak Keys Status = B3 + B4
Braille Back = T1
Braille Forward = T4
Braille Line up = T2
Braille Line up (Virtual Focus) = T2
Virtual Focus Move Physical Up = T1 + T2
Braille Line down = T3
Braille Line down (Virtual Focus) = T3
Virtual Focus Move Physical Down = T3 + T4
Braille Go To Focus = T2 + T3
Braille Line Start = B3
Braille Line End = B6
Braille Top = B1 + B2 + B3
Braille Bottom = B4 + B5 + B6
Braille Cell Left = B1 + B2 + B6
Braille Cell Right = B3 + B4 + B5
Braille Physical/Logical Mode = B1
Virtual Focus Physical on off = B1
Braille Literary Braille on off = B1 + B2 + B4 + B5
Braille Cycle Attributes = B1 + B2 + B3 + B5 + B6
Braille Describe Character on off = B1 + B4
Braille On Off = B3 + B6
Braille Hooks on off = B1 + B2 + B5
Braille Monitor on off = B1 + B3 + B4
Braille Tracking on off = B1 + B2
Braille Cursor on off = B5
Braille Voyager User manual 2.2 page 10 of 20