Advertisement
technicaL features
SOUTDOOR
Input Voltage
Current Drain (Alarm / Stand-By)
Coverage
Aperture Angle
2 PIR / Pyroelectric
Lens 1
Lens 2
OPTIONAL Lens
Alarm period
Anti-opening
Back Tamper
Alarm contact
Tamper Switch
Operating Temperature
Storage Temperature
RFI Protection
Walk Test LED (MW and PIR)
Housing / Cover
Dimensions
weight
Installation must be performed according to accepted standards by specialized personnel.
The manufacturer shall not be responsible if the product is tampered with by unauthorised persons.
We recommend that you check the correct operation of the alarm system at least once per month. A reliable electronic
alarm system does not prevent intrusions, robberies, fires or other occurrences but simply reduces the risk of occurrence.
Installation must be carried out following the local installation norms by qualified personnel.
The manufacturer refuses any responsibility when changes or unauthorized repairs are made to the product/system.
It is recommended to test the operation of the alarm product/system at least once a month. Despite frequent testing and
due to, but not limited to, any or all of the following: tampering, electrical or communication disruption or improper use, it
is possible for the product/system to fail to prevent burglary, rubbery, fire or otherwise. A properly installed and maintained
alarm system can only reduce the risk that this happens.
www.amcelettronica.com
0.5 to 13.8 V
25 mA / 14 mA @ 13.8V
6/12 m
90°
full digital
Fresnel (22 Patterns on 3 levels)
Fresnel horizontal curtain (11 Patterns 1 level)
Fresnel, vertical (11 Patterns 11 level)
2 sec.
✔
✔
0.2 A - 24 Vcc
Max 40 mA - 30 Vcc
From -30 °C to +55 °C
From -30 °C to +60 °C
30 V / m (80 /1000 MHz)*
✔
ABS
185 X 85 X 70 mm
265Gr
soutdoor L
Installation Instructions
Advertisement
