ADVANCED OPERATION
Advanced operation functions are available through
the menu system.
To browse the menu options:
•
Press and hold the
INFO/MENU button:
The Menu will open.
•
Press the
or
button to browse the menu
options available.
•
Press the
Enter button to select the
option displayed.
The options available when set to the DAB band are:
•
Full scan
•
Manual Tune
•
DRC
•
Prune
•
System
•
System>Time
•
System>Language
•
System>Factory Reset
•
System>SW version
The options available when set to the FM band are:
•
Scan setting
•
System
DAB SETTINGS MENU OPTIONS
FULL SCAN: Select Full Scan to re-scan the entire DAB
band and refresh the station list. A Local Scan (selected
with the SCAN button) will scan only the bands used in
the locality of the radio. A full scan will scan all bands.
MANUAL TUNE: You can also manually tune the DAB
band (recommended for advanced users only). This will
enable you to check for active multiplexes.
•
Select the Manual Tuning menu option.
The multiplex channel number and frequency will be
displayed. If a station multiplex exists on this frequency,
the multiplex name will also be displayed.
•
Press the
or
button to change to
another multiplex channel.
•
Press the
Enter button to check the
signal strength of this multiplex.
PRUNE: If your station list includes
stations that you can
no longer receive (you may have moved to a di erent
area), you can select the 'Prune' option to remove the
unavailable stations from the Station List.
7
SYSTEM SETTINGS
•
Press and hold the INFO/MENU button to select
"SYSTEM" from the the unit to select one of the
system setting sub-options.
The sub-option menu will now open.
SYSTEM>TIME: Select the time option to set
the clock manually. The full manual clock setting
operation is described in the 'FIRST TIME USE' section.
SYSTEM>LANGUAGE: Selecting one of the language
options available will change all display indications to
the selected language.
SYSTEM>FACTORY RESET: Select the 'Yes' sub-option
to reset all the settings of your radio to factory original
settings. The station list will also be cleared and any
stored preset memories will be erased. After a factory
reset the radio will re-scan the band and renew the
station list.
SYSTEM>SW VERSION: This option will display the
version number of the control software currently
installed in your radio. This will be helpful to a
technician who is servicing the radio.
FM SETTINGS
When set to the FM band, you can select a INFO/MENU
option to change the scan sensitivity to stop on all
stations or just to stop on strong stations.
System settings are also accessible.