Table of Contents
Advertisement
!
PLEASE READ BEFORE COMMENCING ANY OPERATION AFTER THE REMOVAL OF ALL
TGB CONTENTS
● 2 x Isolator Keys ● 2 x 40 Amp Fuse
● 1 x 30 Amp Fuse ● 1 x 20 Amp Fuse
● 1 x 2.5 Amp Fuse ● Maxi Fuse-puller
● Traction Model 2 x 50 Amp Fuse
For Charger-less Model,
all the above plus:
● 1 x Charger Connector ● 2 x Charger
Connector Terminals ● 4 x Battery
Terminal Connectors ● 1 x Fuse Holder
Lift off top tank assembly to reveal battery
compartment.
Fit battery fuses (contained in start-up
pack) into the battery fuse holder
as illustrated.
Fit the isolator key and switch the machine
on (See below, TGB 4045/4055/4055T
(Fig. A) HGB 3045 & TGB 3045 (Fig.D)
NOTE: Wear suitable gloves when
inserting fuses.
1
!
" Ensure that no metal objects come into contact with battery terminals while the batteries
are exposed. When inserting the first fuse you may notice a spark, this is normal. "
A
C
THE PACKAGING, CAREFULLY OPEN AND CHECK THE CONTENTS.
Fuse Location
2
B
Insert the Isolator key and switch the
TGB 4045/4055/4055T Isolator Key (Fig.
A, B) Vac & Brush Fuses (Fig.C)
HGB3045/TGB3045 Isolator Key (Fig D, E)
Vac & Brush Fuses behind cover plate (Fig.F)
machine on.
Machine Set-up Guide
3
D
F
T 01460 68600
!
!
E
5
Advertisement
Table of Contents
