Operation - KLS Martin group MedLED Sapphire Instructions For Use Manual

5

Operation

Please read chapter 4 "Charging instructions", page 24, before continuing to read these
operating instructions:
NOTE
Risk of eye damage
Do not shine the Headlight MedLED Sapphire
pointing directly at your eyes, turn your head away from the light beam.
Further useful information can be found in chapter 9 "Rheostat operating instructions",
page 30.
26
• Adjust the headband to fit your head size. To do so, first
place the device on your head. Now adjust the width by
turning the knob at the back and the height by adjusting
the Velcro fastener on the top (1).
• Switch on the device by pushing the lever (2) upwards
slightly. While wearing the headlight on your head, look
down and adjust the brightness level as desired by
pushing the lever (2) upwards as far as necessary.
• Adjust the orientation of the light beam by using the
headlight's movable pivot joints (3)
• Adjust the size of the light field by using the control knob
on the top of the lamp casing (4)
®
directly into your eyes. If the light beam is
Instructions for Use
Headlight MedLED Sapphire
®
V 1.0