NEC Aterm MR03LN Instruction Manual page 22

Europe – EU Declaration of Conformity
This device complies with the essential requirements of the
R&TTE Directive 1999/5/EC. The following test methods have
been applied in order to prove presumption of conformity with the
essential requirements of the R&TTE Directive 1999/5/EC:
- EN 60950-1/A12: 2011
Safety of Information Technology Equipment
- EN 50566:2013
Product standard to demonstrate compliance of radio frequency
fields from handheld and body- mounted wireless communication
devices used by the general public (30 MHz — 6 GHz)
- EN 300 328 V1.8.1:2012
Electromagnetic compatibility and Radio spectrum Matters
(ERM); Wideband transmission systems; Data transmission
equipment operating in the 2.4GHz ISM band andusing wide
band modulation techniques; Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE Directive
- EN 301 511 V9.0.2:2003
Global System for Mobile communications (GSM); Harmonized
standard for mobile stations in the GSM 900 and DCS 1800
bands covering essential requirements under article 3.2 of the
R&TTE directive (1999/5/EC)
- EN 62479:2010
Assessment of the compliance of low power electronic and
electrical equipment with the basic restrictions related to human
exposure to electromagnetic fields (10 MHz to 300 GHz)
- EN 301 908-1 V6.2.1:2013
IMT cellular networks; Harmonized EN covering the essential
requirements
of article 3.2 of the R&TTE Directive; Part 1: Introduction and
common requirements