Shutter.pcb - Nikon D3100 VBA28001 Repair Manual

• Peel.off.the.tape.[TA-0016.(5×8)].from.the.lens.contact.unit.(#B2113).
• Unsolder.the.three.wires.of.the.harness.(#1028).

Shutter.PCB

• Turn.the.gear.(indicated.in.red).of.the.SQ.PCB.unit.in.the.direction.of.the.arrow.to.raise.the.mirror...
Then,.set.the.lever's.position.of.the.MG.PCB.unit.to.the."OK".position.as.below.
Caution:.It.may.require.turning.the.gear.several.times.to.become.at."OK".position.
User ID:INC
TA-0016.(5×8)
#1028
OK NG:.Not.Good
- D42 ・ D3100 -
VBA28001-R.3813.A
[Red]
[Gray]
[Black]
NG:.Not.Good