Bluetooth; Pairing; Pairing A Second Device - MAXTEK 76747 User Manual

Bluetooth

Pairing

Make sure your device has Bluetooth
are turned off. Press and hold the function button for 6 seconds until
the LED is flashing red and white. Once the headphones are in
pairing mode, search on your device for "MAXTEK AUDIO" and
select from the list to pair. In most case the pairing will be done
automatically, but you may need to enter the code '0000'.
If the pairing is successful the red LED will constantly slow flash.
Also a beep will be heard.

Pairing A Second Device

After you have successfully paired one device you can pair another
to the headphones. To do this turn off the Bluetooth
original device and turn off the headphones.
Press and hold the function button for 6 seconds until the LED is
flashing red and white. Once the headphones are in pairing mode,
search on your device for "MAXTEK AUDIO" and select from the list
to pair. In most cases the pairing will be done automatically, but you
may need to enter the code '0000'.
If the pairing is successful the red LED will constantly slow flash.
Also a beep will be heard.
Please note:
A pairable device is either a smart phone, laptop, MP3 player, PC etc, not
another pair of headphones or a similar receiving peripheral device.
These headphones will not connect to a Bluetooth
specified by the devices manufacturer.
8
®
active and the headphones
®
®
®
TV or Hi-Fi System unless
After Sales Support
UK/N.IRELAND HELPLINE N
REP.IRELAND HELPLINE N
WEBSITE:
EMAIL:
function of the
: 01270 508538
O
: 1800 995 036
O
www.quesh.co.uk
enquiries@quesh.co.uk