Receiver Unit - Philips VL1405 Instructions For Use Manual

B) Receiver unit
19 Power button
switches the receiver between stand-by and on. When the receiver unit
is turned on or off the transmitter unit is automatically turned on or off
as well.
20 Power light
lights red in stand-by mode, green when power is on, flashes when
receiving remote control commands
21 Remote control signal receiver
receives remote control commands which are sent to the transmitter
unit to control the video sources.
22 Input source up (+) / down (-) buttons
selects one of the four video sources connected to the transmitter unit
for viewing on the third TV
23 Transmission channel switch
switches the frequency channel of the audio/video signal to minimize
interference.
24 SCART output connector
for connection to the third TV
25 DC power input
for connection to the mains
26 SCART cable
27 Power adapter
28 Remote control antenna
ENGLISH 7