Philips VL1405 Instructions For Use Manual page 11

No control of
video sources
from TV3
Buzzing sound
when using the
remote control
Easylink feature
doesn't work
S-VHS video gives
black and white
pictures only
DVD player gives
no pictures on
TV1,TV2 or TV3
• Aim the remote control directly at the receiver unit and ensure that
there are no obstacles in between (B-19 must flash).
• Ensure that there is no other wireless device (wireless headphones,
speakers, RF control signals) interfering with the remote control.
• The maximum operating distance between the remote control and the
receiver unit is 6 metres*; make sure you are within this range.
• Ensure that the transmitter and receiver unit are more than 5 metres
apart.
• Ensure that the remote control belonging to the video source is used to
control it.
• Reposition the remote control blaster cord light on the video source,
or place the light 5-10 cm in front of the video source.
• Move the receiver unit around gently until the buzzing sound stops.
• Move the transmitter unit around gently until the buzzing sound stops.
• With some types of TV you will not be able to solve this problem.
• Check that both your TV and VCR support this feature
(check TV and VCRs user manuals).
• Use Easylink compatible or fully wired SCART cables.
• Select CVBS video output format for your S-VHS VCR when using
SCART input 1 or 2 (check the VCRs user manual).
• Connect the DVD player to SCART input 3 or 4 (both support RGB).
• Select CVBS video output format for your DVD player
(check the DVD player's user manual).
* depends on remote control's signal strength and battery condition.
ENGLISH 11