Advertisement
12 OTHER FUNCTIONS IN SETTINGS
Enter menu with
continue to Settings:
Sound & Alert: To choose a phone profile (f.i. Silent) and
configure your personal settings.
Call waiting: You can activate/deactivate and check status
to get a notification about an incoming call while having a
phone talk.
Network settings: Choose automatic (automatic boot in a
network) or manual selection (select a network manually).
Favorites
: your favorite functions pressing 1 button
Auto power on/Auto power off
Voicemail number: Change the voicemail number
Security settings: Activate, deactivate or change PIN and
phonecode (default phone code: 1234).
Restore Factory: Reset the phone to factory settings.
13 DISPOSAL
Disposal of packaging: Packaging materials are
recyclable and shall enter the recycling process.
Disposal of battery: Do not insert battery into
household trash for disposal! You are obligated to
return used batteries. These can be handed into
local collection areas or to specialty shops.
Disposal of Device: When this product is taken out of
service, please do not throw it into the household
trash. Take care of the environment by bringing it to a
collection place, where old devices are accepted and
brought into an environmentally-friendly disposal/
recycling procedure.
14 FREQUENTLY ASKED QUESTIONS
Screen shows "Insert SIM card! Only emergency call
,
112": Check the direction of the SIM card
A call failed: Check the selected telephone number and
area code again for accuracy (area code entered?).
The mobile telephone display is blank/black: Telephone
is in energy saving mode (press any key) or it is switched off
(press
The mobile phone does not react: Remove battery, re-
insert and switch on the device. If there is still no reaction,
refer to the service centre.
The charging procedure does not begin: This can take
several minutes. If there is no reaction after 10 minutes, refer
phone to service centre.
15 Warning
FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
for 2 seconds to switch on).
Advertisement
