Advertisement
2 INSERT SIM CARD
Fig 1
Fig 2
Fig. 1: Remove battery cover (as shown).
Fig. 2: Slide SIM card in with the gold contact facing down.
3 INSERT BATTERY AND CHARGING
Fig 4
Fig 5
Fig. 3: Insert battery (gold contacts on right front side).
Fig. 4: Close battery door: slide cover to closed position
with a 'click'.
Fig. 5: Plug charging cable into the socket on the lower
narrow side of the phone or
Fig. 6: in the plug on the back of the desktop charger
Charging: Battery indication bars in upper right corner of
the display are moving
The led on the upper side of the closed phone is on.
Full battery: Bars in upper right display corner are solid.
Note: Charge battery for at least 2 hours before first use!
4 DISPLAY SYMBOLS (SCREEN)
battery strength
signal strength
new SMS
Roaming mode
ringtone off
alarm on
earphone
call diversion
missed call
5 FIRST STEPS
Switch on the phone by pressing the power on/off-key
at least 2 seconds.
Switch off by pressing power on/off
When using a new SIM card, enter the 4 digit PIN Code
Fig 3
(Personal Identification Number) and confirm with
PIN-Code: The PIN-Code is a 4-digit number combination
preventing others from switching on your mobile phone.
Entering Menu:
Fig 6
Note: due to inactivity, the phone lights and screen turn off
after a while. To turn on again, press any key.
Incoming Call:
End call: Press
Dial: Enter the telephone number via the keypad (including
area code with 0) - start call with
Redial list: press
dialled, missed and received calls) and select a number and
start call with
Handsfree Speaking:
During a call handsfree function can be switched on or off:
press
Switch off your PIN-Code: In menu: Settings
Settings
PIN
PIN off.
Press
- key.
Scroll through menu points: with
Confirm: with
.
Pick up call: Press
- key.
Reject call: Press
- key.
- key.
- key, scroll through call list with
.
Options
Handsfree.
for
for 2 seconds again.
.
Security
and
.
.
(all
Advertisement
