Sharp BD-HP50U Service Manual page 9

3. Removing the BD drive
1. Disconnect the SATA cable and power cable.
2. Remove four screws and remove the BD unit (with the angle) upward.
3. Remove four screws and remove the BD unit.
BD drive
angle (Left)
4. Removing the front PWB
1. Remove four screws .
2. Remove one screw .
3. Remove the operation PWB angles (left and right).
Operation PWB angle (Left)
Operation PWB (Left)
4
BD
5
drive
7
LCD PWB
6
6
Power cable
4
4
5
Operation PWB angle (Right)
3 – 2
BD-HP50U
SATA cable
BD drive
angle (Right)