Chapter 3. Removing Of Major Parts; Removing Of Major Parts - Sharp BD-HP50U Service Manual

BD-HP50U
BDHP50U
CHAPTER 3.

REMOVING OF MAJOR PARTS

[1] REMOVING OF MAJOR PARTS
1. Removing the tray cover
1. Eject the tray by inserting a pin into the compulsory eject hole, then remove the tray cover.
2. Removing the cabinet and the panel
1. Remove two screws and remove the side decoration cover (left/right) from the top cabinet.
2. Remove two screws and three screws
3. Remove two cables from the front panel.
4. Unhook claws of the front panel and remove the front panel.
Side decoration
cover (Left)
Front panel
Insert
a pin
Tray cover
from the top cabinet.
2
Top cabinet
3 – 1
Service Manual
1
3
2
1
Side decoration
cover (Right)