Sync" Switch - Roland TR808-M Installation Manual

TR808 TR808- - - - M M M M TR808 TR808
e) Screw back the three screws on the front panel TR-808 (pic. 7-3), three screws on the rear
panel (pic. 7-4) and four screws on the top panel (pic. 7-5).
The installation of the MIDI kit is now complete and TR-808 is ready to communicate over the
MIDI. Please read carefully the user manual first.
See "DAC Calibration Procedure" chapter if a malfunction occurs in triggering of TR-808's
instruments via MIDI.
3. NEW FUNCTIONS OF TR-808

3.1. "SYNC" SWITCH

"SYNC" switch on the rear panel has now 3 positions. In the upper or lower positions, all TR-808
functions remain the same as before installation of the MIDI retrofit (DIN-SYNC OUT, DIN-SYNC IN).
The middle position switches on the MIDI input.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
Copyright © 2010 CHD Elektroservis. All rights reserved.
MIDI Interface For Roland TR MIDI Interface For Roland TR- - - - 808 MIDI Interface For Roland TR MIDI Interface For Roland TR
13
808 808 808
Model 8- - - - 448 ver. 3.2 Model 8 448 ver. 3.2
Model 8 Model 8 448 ver. 3.2 448 ver. 3.2