Traffic In Your Area - Kenwood DNX994S Instruction Manual

Traffic in Your Area

Searching for Traffic Delays
1
From the map page, select
2
Select Traffic Conditions >
3
Select an item in the list.
4
If there is more than one delay, use the
arrows to view additional delays.
Viewing a Traffic Incident on the Map
1
From the map, select
2
Select Traffic Conditions.
3
Select a traffic icon.
Understanding Traffic Data
The traffic legend explains the icons and
colors used on the traffic map.
1
From the map, select
2
Select Traffic Legend.
Customizing the Device
Map and Vehicle Settings
To open the Map and Vehicle settings, from
the main menu, select Settings > Map &
Vehicle.
Vehicle: Sets the icon that represents your
position on the map.
Driving Map View: Sets the perspective on
the map.
Map Detail: Sets the level of detail on the
map. More detail may cause the map to
draw slower.
Map Theme: Changes the color of the map
data.
Map Buttons: Sets which icons are included
on the map. Up to three icons can be
included on the map.
Map Layers: Sets the data that appears on
the map page (Customizing the Map
Layers).
Dashboards: Sets the map dashboard
layout.
Auto Zoom: Automatically selects the zoom
level for optimal use of your map. When
disabled, you must zoom in or out
manually.
12
.
.
.
> Traffic.
Audible Speed Alerts: Alerts you when
your vehicle is exceeding the speed limit.
NOTE: This feature is not available in all
areas.
myMaps: Sets which installed maps the
device uses.
Enabling Maps
You can enable map products installed on
your device.
1
Select Settings > Map & Vehicle >
myMaps.
2
Select a map.
Navigation Settings
To open the Navigation settings page, from
the main menu, select Settings >
Navigation.
Calculation Mode: Sets the route
calculation method.
Avoidances: Sets road features to avoid on
a route.
Custom Avoidances: Allows you to avoid
specific roads or areas.
Advanced Detours: Sets the length of the
detour.
Safe Mode: Disables all functions that
require significant operator attention and
could become a distraction while driving.
Voice Prompts: Enables voice prompts.
GPS Simulator: Stops the device from
receiving a GPS signal.
Changing the Route Calculation
Mode
1
Select Settings > Navigation >
Calculation Mode.
2
Select an option:
• Select Faster Time to calculate routes
that are faster to drive but can be
longer in distance.
• Select Shorter Distance to calculate
routes that are shorter in distance but
can take more time to drive.
• Select Less Fuel to calculate routes
that are more fuel-efficient.
3
Select Save.
Customizing the Device