GE DMC490 Software Configuration Manual page 3

Purpose
This guide provides detailed information on how to configure the software of the Multilin
DMC490 Microgrid Controller.
Intended Audience
This document is a resource for utility personnel and system engineers who are
implementing the DMC490 for a microgrid, and protection engineers who are controlling
network devices. It is intended for readers who have knowledge of substation automation
equipment and applications.
Additional Documentation
For further information about the DMC490, refer to the following documents.
• D400 Substation Gateway Instruction Manual (994-0089)
•
D400 Substation Gateway Software Configuration Guide (SWM0066 V5.2)
• D400 V5.20 online Help (includes D400 configuration tool online Help)
How to Use this Guide
For most operational features, refer to the documents listed above.
For information specific to the Microgrid Controller (MGC) feature, see the details provided in
this manual (SWM0091).
The DMC490 employs sophisticated applications that contain many advanced features and
capabilities. To successfully configure and operate the DMC490 for your environment, it is
highly recommended that you work through this entire guide and the D400 Substation
Gateway Software Configuration Guide (SWM0066 V5.2).
If you need assistance, contact General Electric Company GE Grid Solutions Technical
Support.
In configuration tables, "N/A" in the "Default" column indicates there is no default setting
provided, and "X" indicates the number is automatically incremented.
About this Document