Others - Panasonic SC-AP01 Owner's Manual

SC-AP01PPC~RQT9655.book 11 ページ ２０１２年２月２日 木曜日 午後１０時４２分

Others

Wi-Fi ® signal strength
To check the Wi-Fi ® signal strength where the unit
is located.
Preparation
Connect this unit to the wireless network. (
1
Stop the AirPlay playback to this unit.
≥ Wait for at least 15 seconds before
proceeding to step 2.
2
Press and hold [VOL +] and then also
[VOL –] on the main unit for more than 2
seconds.
≥ The operation indicator (
number of times.
≥ A stable connection is available when the operation
indicator blinks 3 times.
Change the position or angle of your wireless network
router or the unit in the following cases:
– The operation indicator only blinks 2 times or 1 time.
– The sound is interrupted.
Software update
Occasionally, Panasonic may release updated
software for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
5)
Preparation
Connect this unit to the wireless network. (
≥ Make sure that the wireless network is connected to the
Internet.
1
Press and hold [VOL –] and then also
[– WPS] on the main unit for more than 2
seconds.
4) blinks a set
DO NOT DISCONNECT the AC adaptor while
this unit is updating.
≥ During the update process, no other operations can be
performed.
≥ If the update is unsuccessful, the operation indicator
will blink and light in a specific sequence. (
{.
2
Disconnect the AC adaptor and reconnect
it after 3 minutes.
≥ Downloading will require several minutes. It may
take longer or may not work properly depending on
the connection environment.
≥ If the update is unsuccessful, the operation indicator will
blink and light in a specific sequence.
No. of blinks
After the update has finished, the operation
indicator ( 4) lights.
Problem and solution
The software download has failed.
Please try again later.
3
The server cannot be found. Make
sure that the wireless network is
connected to the Internet.
This unit cannot connect to the
2 network. Check the network
connection.
The update has failed. Turn this unit
off and remove the AC adaptor.
1
Reconnect the AC adaptor and try
again.
5)
below)
11
RQT9655