Troubleshooting - Philips DVP 3040 Quick Start Manual

Set up
2
A
Finding the viewing channel
Press 2 on the DVD player's remote control.
A
B
Switch on the TV.
C
Press SETUP on the DVD player's remote control.
- - General Setup Page - -
Disc Lock
Display Dim
Program
OSD Language
Sleep
DIVX(R) Vod Code
Go to General Setup Page
D
Press '0' on the TV's remote control, then repeatedly
press the Channel Down button until you see the
DVD background screen. This is the correct viewing
channel for the DVD player.
Note For some TVs, to fi nd the correct viewing
channel, you can keep pressing the AV or SELECT
buttons, If still unable to fi nd the correct viewing
channel, check the connections again or check your
TV's user manual.
B
Language preference setup
Use the DVD player's remote control to select the
desired On-screen language, Audio language, Subtitle
language and Menu language you preferred.
Selecting On-screen language
A
Press to select {General Setup Page}.
B
Press to highlight
- - General Setup Page - -
Disc Lock
Display Dim
Program
OSD Language
Sleep
DIVX(R) Vod Code
Set OSD Language English
C
Press to select a language and press OK.
Note The On-screen language for the setup menu will
remain once you set it, regardless of various disc
languages.
Need help?
User Manual
See the user manual that cames with your Philips DVD Player
Online
Go to www.usasupport.philips.com
Hotline
Call 1-888-PHILIPS (1-888-744-5477) for our operators.
1_dvd3040_qsg_37_eng1.indd 2 1_dvd3040_qsg_37_eng1.indd 2
, then press .
{OSD Language}
ENGLISH
FRANÇAIS
DEUTSCH
NEDERLANDS
3 Enjoy
A
Start playback
A
Playback may start automatically when a disc has
been loaded in the disc tray.
Note If a disc menu appears on the TV:
1) Press to scroll through the options
available in the DVD menu.
2) Press
PLAY/PAUSE
want to start playback
Å to
B
Press PLAY/PAUSE
start playback.
C
To stop playback, press
STOP Ç.
D
Press DISC MENU to go
back to the disc menu
anytime.

Troubleshooting

For more troubleshooting tips, see the user
manual.
No power
• Check if the AC power cord is properly connected.
• Press the STANDBY-ON on the front of the DVD
player to turn on the power.
No picture
• Check connection to TV and ensure the plugs are
fi rmly in place.
No sound or distorted sound
• Adjust the volume
• Check audio connections are in the correct input
source.
Remote control does not work
• Check the batteries are loaded correctly or replace the
batteries with new ones.
• Reduce the distance between the remote control and
the DVD player.
• Point the remote control directly toward the IR
sensor.
2005 C Philips Consumer Electronics
Philips Electronics North America Corp
A Division of
P.O. Box 671539
Marietta, GA 30006-0026
Printed in China
SL/0548/37_03
Å on the option you
2005-12-01 3:03:40 PM 2005-12-01 3:03:40 PM