Page 2
Thank you for choosing the iProvèn Dual Mode Digital Infrared Thermometer. The DMT-489 can be used to measure body temperature by sensing heat radiated from the eardrum or from the forehead. It can also be used to measure the room temperature.
Contents 1. Safety Instructions and Precautions ........4 2. Purpose of the Device...............5 2.1 Description of the Device ............5 2.2 Description of the Display ............5 3. Setup Instructions ................6 3.1 First use ....................6 3.2 Replacing the Batteries ..............6 4. Operating Instructions ..............6 4.1 Precautions for Accurate Measurements ......6 4.2 How to Correctly perform an Ear Measurement....6 4.3 How to Correctly perform a Head Measurement ....7...
1. Safety Instructions and Precautions • The ear measuring function of this thermometer is not suitable for children under 6 months of age. For children younger than 6 months we recommend using the Forehead mode or a rectal digital thermometer such as the iProvèn DT-R1221B.
2. Purpose of the Device This thermometer is intended to be used to measure the body temperature of hu- mans who are a minimum of six months old when using the ear measuring function and suitable for all ages when using the head function. It measures the body tem- perature based on heat radiating from the eardrum or from the forehead.
3. Setup instructions 3.1 First use Before using this product for the first time, the battery protection tab must be removed. Remove this plastic tab by gently pulling it out of the battery compartment. 3.2 Replacing the Batteries Release the battery cover by gently sliding it down. Remove the battery cover.
Remove the sensor cap to expose the sensor probe. For adults, pull the ear backward and upward with your free hand to straighten the ear canal (image 1). Gently insert the sensor into the ear canal. Ensure that the sensor is aimed directly toward the eardrum (image 2). If the ear canal is not straightened, inaccurate readings may result (image 3).
4.4 Memory Retrieval Each time a successful measurement is performed, the measurement data is stored in the thermometer memory. The memory of this thermometer has a capacity of 20 measurements. To retrieve stored measurements follow these instructions: Ensure that the thermometer is turned off. If the display is not dark, leave the buttons untouched for 10 seconds.
5.3 Interpreting the Measurement Results �F �C Indication What to do Display Color Green 86-95,7 30-35,4 Hypothermia Consult doctor immediately. Lower temperatures in the morning are Decreased Green 85,.8-96.7 35,3-35,9 perfectly normal. temperature If you are feeling cold take a hot shower. Good Green 96.8-99.6...
“H ˚“: Measurement exceeds 99,9 ˚C or 212 ˚ F. Desired action: Make sure you are following the instructions for taking accurate measurements. 9. Technical Information • Model: Dual Mode Infrared Thermometer DMT-489 • Applicable regulations and laws: ASTM 1965/EN12470-5/GB/T 19146-2010 •...
10. Warranty What does this limited warranty cover? This Limited Warranty covers any defects in materials or workmanship under normal use during the Warranty Period. What will we do to correct problems? iProvèn will either replace the product or repair the product at no charge, using new or refurbished replacement parts. How long does the coverage last? The Warranty Period of this iProvèn product is 2 years from the date of purchase.
Page 12
iProvèn owns and reserves the rights comprised in the copyright of this document. No part of this document may be changed, copied, repro- duced, or imitated in any form or by any means without prior written consent of iProvèn. All statements, information, and recommendations in this document are provided “AS IS”...
Need help?
Do you have a question about the DMT-489 and is the answer not in the manual?
Questions and answers