Jabra Elite Sport OTE050 User Manual page 10

For firmware update information, see Section
7.10.
Please note that if the replacement earbud
was the right earbud, you will need to re-pair
the Jabra Sport Elite to your smartphone, and
then re-update the firmware. See Section 5.1
and Section 7.10.
2.5 Using a replacement charging case
Before using a replacement charging case it
will need to be synced with your current
earbuds. The charging case should also be
charged for 1 hour before placing the earbuds
inside it.
To sync, place your current earbuds into the
replacement charging case, and close the lid.
The charging case's LEDs may flash purple to
indicate the firmware is being updated on the
replacement charging case. Please wait until
the LEDs stop flashing purple before opening
the charging case or using the Jabra Sport
Elite.
For firmware update information, see Section
7.10.
10
Jabra Elite Sport