Zte F350 User Manual page 13

 Do not contact battery directly into an electric outlet or cigarette lighter charger.
Use only authorized chargers.
 Do not puncture the battery with a sharp object such as a needle.
 When the battery is disposed, be sure it is non-conducting by applying vinyl tape
to the (+) and (-) terminals.
 Do not drop, throw, or subject the handset to rough treatment.
 Stop using the battery if abnormal heat, odor, discoloration, deformation, or
abnormal condition is detected during use, charge or storage.
 Do not use your handset with a damaged or deformed battery.
 Do not solder the battery directly.
 Remove the battery whose life cycle has expired from equipment immediately.
 The earpiece may become warm during normal use. Also, the handset itself may
become warm while the battery is being charged.
 When a handset is in vibration mode, the vibration may cause the handset to
move.
 Be careful not to place the handset near heat sources (such as a heater).
 Use a damp or anti-static cloth to clean the handset. Do not use an ordinary dry
cloth or electrostatic cloth. Do not use chemical or abrasive cleaners as these
could damage the casing.
 Third party equipment: The use of third party equipment, cables, or accessories,
not made or authorized by ZTE, may invalidate the warranty of your phone and
also adversely affect the phone's safety and operation.
13
F350 User Manual