Open your mobile device's WiFi, find the Pico's WiFi hotspot, thenclick to connect. Then after connected, your
mobile deviceconnected with Pico directly. When you are sharing your local Video and Picture contents, we
suggest you to connect Pico directly to get the better using experience.
Under the DLNA/Airplay mode, why my mobile
device can not find Pico?
Please ensure your mobile device and Pico are under
the same WiFi hotspot.
What's the K stone Calibration?
This function can adjust the projected image as the
rectangular shape when the lens are on different angle.
Under the Setting->K stone calibaration, you can
choose to do the calibration manualy or automatically.
By default, the calibration will be done automatically.
For more information, please visit:
Environmental, recycling, and disposalinformation
General recycling statement
Lenovo encourages owners of information technology (IT) equipment toresponsibly recycle their equipment when
it is no longer needed. Lenovo offers avariety of programs and services to assist equipment owners in recycling
their ITproducts. For information on recycling Lenovo products, go to:http://www.lenovo.com/recycling.
Why my contents in the MicroSD card's file name
displayed as messy code？
Due to the system limitation, for the MicroSD card file
system, we only support English and Chinese.
Why my mobile device cannot find Pico's WiFi when
it connected to the 5GHz WiFi hotspot?
When Pico connected to the 5GHz WiFi hotspot, Pico
will working on 5GHz WiFi channel, if your mobile
device don't support 5GHz WiFi, then your mobile
device cannot detect its WiFi signal. For this case,
please use a 5GHz WiFi-enabled mobile device to
control Pico to disconnect the 5GHz WiFi and
reconnect to other 2.4GHz WiFi.