Displaying Altitude/Depth Logs As A Graph - Nikon COOLPIX W300 Reference Manual

Displaying Altitude/Depth Logs as a Graph

Press the d button M z menu icon M View log M k button M
Altitude/depth logs M k button
Select a log (date) that you want to display and
press the k button to display the altitude or water
depth data as a graph.
- The horizontal axis of the graph shows the total
time of log recording, and the vertical axis of the
graph shows the total variations in altitude/
depth during log recording.
- If images were captured while the log was being
recorded, they are displayed as thumbnails, and
shooting points are displayed on a graph.
Press the l button when the log list screen is
displayed to delete the selected log or all saved
altitude/depth logs.
The operations described below can be performed while a graph is displayed.
Operation
d button
Multi selector
Zoom control
k button
Using Location Data Functions

Displaying Altitude/Depth Logs as a Graph

Return to the log list screen.
Use JK to move the yellow selection area.
The yellow selection area is displayed when the camera obtains
more than 30 recorded logs.
Move toward g (i) to zoom in on the area inside the selection area.
Use JK to move the displayed area.
Move toward f (h) to return to the full graph display.
Thumbnail images are selected, and operations described below can
be performed.
Multi selector
Zoom control
k button
Description
Use JK to switch the selected image.
The shooting point of the selected image
changes to yellow on the graph.
g (i): Display the selected image in full-frame
playback mode.
Use JK to display the previous or next image.
f (h): Return to the graph display.
Return to the graph operation screen.
104
Shooting point
Selection area
m / m 10 30
0 20 40
100
80
60
40
20
0 0
15/11/2017 [2] 15:30
Thumbnail playback
50
60