Recording The Location Data On The Image - Nikon COOLPIX W300 Reference Manual

Recording the Location Data on the Image

Press the d button M z menu icon M Location data options M k button
Set Time zone and date (A162) correctly before using the location data functions.
1
Set Use built-in location data to On.
After the settings are complete, press the d
button or shutter-release button to exit the menu.
To receive signals easily, operate in an open-air
area.
2
Check the location data reception on
the shooting screen.
n or o: Signals are being received from four or
more satellites, or from three satellites, and
location data is being obtained. The location data
is recorded on the image.
z: Signals are being received, but location data
cannot be obtained. The location data is not
recorded on the image.
y: Signals cannot be received from the satellites,
and location data cannot be obtained. The location data is not recorded on the
image.
3
Shoot images while positioning is being performed.
The location data is recorded on shot images.
z is displayed on images with recorded location data in the camera's playback
screen (A7).
The recorded location data can be checked on a map by using ViewNX-i after
transferring images to a computer (A115).
Using Location Data Functions

Recording the Location Data on the Image

Location data reception
97
Use built-in location data
On
Off
40
30
20
10
0
1 5 m 1 5 m
1 0 1 0 h P a 1 0 1 0 h P a
-10
2 5 m 0 s 2 5 m 0 s
5 0 0 5 0 0