Fl-N01 Is Not Turned On - Sony FL-N01 Help Manual

Table of Contents

Help Guide

Future Lab Program N

FL-N01

FL-N01 is not turned on.

Charge the battery of FL-N01. FL-N01 will not be turned on for 10 seconds after starting to charge the battery. Wait for 10

seconds to turn FL-N01 on.

Press and hold the

following to synchronize the time setting of FL-N01 with the "Future Lab Program N" app.

Open the status screen of the "Future Lab Program N" app and check if FL-N01 and your smartphone are connected via

Bluetooth.

If there is no Bluetooth connection established between FL-N01 and your smartphone, connect them via Bluetooth again.

See "If FL-N01 does not operate properly" on "Precautions," then initialize FL-N01 as follows.

Press and hold the

volume - buttons simultaneously for more than 10 seconds until FL-N01 vibrates. The indicator light flashes for about 10

minutes then FL-N01 turns off.

If the same problem occurs repeatedly, there may be a malfunction.

After FL-N01 is initialized, follow all the procedures of Initial Setup of the "Future Lab Program N" app.

If the device contains condensation, wait a few hours to let the device dry out.