Sony FL-N01 Help Manual page 100

by turning the direction of the built-in antenna to the connected smartphone. When obstacles are between the antenna of the
connected device and the built-in antenna of FL-N01, noise or audio dropout may occur, or communications may be disabled.
Bluetooth communications may be disabled, or noise or audio dropout may occur under the following conditions.
There is a person between FL-N01 and the smartphone.
This situation may be improved by placing the smartphone facing the antenna of FL-N01.
There is an obstacle, such as a metal object or wall, between FL-N01 and the smartphone.
A device using 2.4 GHz frequency, such as a Wi-Fi device, cordless telephone, or microwave oven, is in use near FL-N01.
Because smartphones and Wi-Fi (IEEE802.11b/g/n) use the same frequency (2.4 GHz), microwave interference may occur
resulting in noise or audio dropout, or communications may be disabled if FL-N01 is used near a Wi-Fi device. In such a
case, perform the following.
Use FL-N01 at least 10 m (30 feet) away from the Wi-Fi device.
If FL-N01 is used within 10 m (30 feet) of a Wi-Fi device, turn off the Wi-Fi device.
Install FL-N01 and the smartphone close to each other as much as possible.
Microwaves emitted from a smartphone may affect the operation of electronic medical devices. Turn off FL-N01 and other
Bluetooth devices in the following locations, as it may cause an accident:
where inflammable gas is present, in a hospital, or a gasoline station
near automatic doors or a fire alarm
Do not use FL-N01 on an airplane. Radio waves may affect instruments, causing an accident due to malfunction.
Due to the characteristic of Bluetooth wireless technology, the sound played on FL-N01 is slightly delayed from the sound
played on the smartphone when talking on the telephone or listening to music.
FL-N01 supports security capabilities that comply with the Bluetooth standard to provide a secure connection when the
Bluetooth wireless technology is used, but security may not be enough depending on the setting. Be careful when
communicating using Bluetooth wireless technology.
We do not take any responsibility for the leakage of information during Bluetooth communications.
Connection with all Bluetooth devices cannot be guaranteed.
A device featuring the Bluetooth function is required to conform to the Bluetooth standard specified by Bluetooth SIG, Inc.
and be authenticated.
Even if the connected device conforms to the above mentioned Bluetooth standard, some devices may not be connected or
work correctly depending on the features or specifications of the device.
While talking on the phone hands free, noise may occur depending on the device or communication environment.
Depending on the device to be connected, it may require some time to start communications.
Note on static electricity
Static electricity accumulated in the body may cause mild tingling. To minimize the effect, wear clothes made from natural
materials.
On photos and copyright
You should only take photos in environments where you are permitted to do so.
You should always get permission from your subject before taking photos.
Various countries have laws regulating taking photos of people or things. It is your responsibility to make sure you comply with
91