Panel Overview: High-Definition Inputs - Philips 55PW9383 Directions For Use Manual

P
What You Can Connect to the
High-definition Input Jacks
1
HD INPUT-AV 4—use to connect dig-
ital equipment with a 1080i or a 480p
signal output, such as HD receivers
(1080i or 480p) or DVD players with
progressive-scan capability (480p). You
can connect equipment with YPbPr
component video or RGB outputs to
the HD INPUT-AV 4 jacks. H and V
sync connections may or may not be
required for RGB connections. (See
page 59.) Dedicated audio input jacks
are located with the HD INPUT-AV 4
video jacks.
NOTE: The Picture-in-Picture (PIP)
feature is not available for use with AV 4.
2
HD INPUT-AV 5—use to connect digi-
tal equipment with DVI (digital video
interface) 1080i or 480p output. DVI is
a specific digital input allowing encrypt-
ed transmission of uncompressed HD
content. DVI includes HDCP (high-
bandwidth digital content protection),
which is supported by Hollywood,
satellite providers, and most of the con-
sumer electronics industry. DVI is gain-
ing momentum and quickly becoming
an industry standard for the consumer to
view high-definition material while keep-
ing content protected.
NOTE: The Picture-in-Picture (PIP)
feature is not available for use with AV5.
H H
ELPFUL
• The TV's default color-space setting for HD
INPUT-AV 4 is YPbPr. If the picture looks
grossly incorrect, try changing the color-space
setting on either the digital equipment or the
TV. For more information on setting the color
space on the digital equipment, see the equip-
ment's directions-for-use manual. To set the
TV's color space, see page 61 in this manual.
• This television is designed to be compatible
with high-definition signal standards 1080i
and 480p as specified by the Electronic
Industries Association standard EIA770.3.
Because output standards may vary by manu-
facturer, you may encounter some digital
equipment that will not properly display pic-
tures on the TV.
• The PIP (Picture-in-picture) feature
to tune to a program in the main window and
scan other channels in the PIP window. From a
single antenna or cable input, signals are separat-
ed into two signals within the television. The
AV1, AV2, and AV3 inputs are also available as
PIP sources.
O
ANEL VERVIEW
HD INPUT-AV 4
HD INPUT-AV 5
INTS
allows you
: H -
IGH DEFINITION
ANTENNA IN 75Ω AMP SWITCH
EXT
+
CENTER CHANNEL AMP INPUT
INPUT-AV 1
VIDEO
S-VIDEO
L
L
AUDIO
R
Summary of signal compatibilities
TV Input
7
Connecting Accessory Devices to Your TV
I
NPUTS
Rear of TV
INT
_
HD INPUT-AV 5
DVI
HD INPUT-AV 4
OUTPUT INPUT-AV 2 SUBWOOFER
Y
VIDEO
S-VIDEO
L
Pb
L
AUDIO
Pr
R
Compatible output signal
from an external source
1080i (1080 lines, interlaced) or
480p (480 lines, progressive scan)
Digital video interface (DVI) with
1080i (1080 lines, interlaced) or
480p (480 lines, progressive scan)
H
ELPFUL
Because DVI is such new technology, the elec-
tronics industry is still working toward a deci-
sion on one standard. Philips testing has deter-
mined that compatibility issues exist with
respect to a limited number of high-definition
receivers when they are connected to the DVI
input on this television. If you should experi-
ence difficulties, please contact our Customer
Care Center at 1-800-531-0039.
2
1
G/Y
R/Pr
B/Pb
V
L L
SYNC
AUDIO AUDIO
H
R R
or device
H
INT