Connecting An Hd Receiver To The Hd Input-Av 4 Jacks - Philips 55PP 9352 Directions For Use Manual

Rear-projection hdtv monitor
Hide thumbs Also See for 55PP 9352:
Table of Contents

Advertisement

Connecting Accessory Devices to Your TV
C
ONNECTING AN
D
igital equipment with a 1080i or 480p out-
put, is compatible with the HD INPUT-AV 4
video jacks.
NOTE: This television is designed to be compati-
ble with high-definition signal standards 1080i
and 480p as specified by the Electronic Industries
Association standard EIA770.3. Because output
standards may vary by manufacturer, you may
encounter some digital equipment that will not
properly display pictures on the TV.
To make the connections shown in this example,
you will need:
• one S-VIDEO cable
• three cables for video connections (standard
RCA connectors)
• four cables for audio connections (standard
RCA connectors)
• one coaxial cable (75 ).
NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.
BEGIN
1
Connect S-VIDEO and audio cables.
NOTE: This example uses
INPUT-AV 1. You can use INPUT-AV 2 or
the side input jacks if you want.
• Connect an S-VIDEO cable from the HD
receiver's S-VIDEO jack to the TV's
INPUT-AV 1 S-VIDEO jack.
• Connect from the HD receiver's AUDIO
L(eft) and R(ight) jacks to the TV's
INPUT-AV 1 L(eft) and R(ight) AUDIO
jacks.
2
Connect component video and audio
cables to the TV's HD inputs.
• Connect from the YPRPB jacks on
the HD receiver to the TV's HD
INPUT-AV 4 G/Y, R/Pr, B/Pb jacks.
• Connect from the HD receiver's AUDIO
L(eft) and R(ight) jacks to the TV's HD
INPUT-AV 4 L(eft) and R(ight) AUDIO
jacks.
3
Connect coaxial cables.
• Connect the coaxial cable lead-in from
your cable outlet, cable converter box, or
VHF/UHF antenna to the IN FROM
ANT jack on the HD receiver.
• Connect a coaxial cable from the OUT
TO TV jack to the ANTENNA IN 75
jack on the TV.
• Connect the coaxial cable lead-in from a
satellite dish antenna to the SATELLITE
IN jack on the HD receiver.
4
Refer to the directions-for-use manual
that came with the HD receiver for setup
instructions.
HD R
ECEIVER TO THE
3
ANTENNA IN 75
1
Rear of HD Receiver
(Example: Philips DSHD800)
• Making a standard connection along with the HD connection as shown
in the example (S-VIDEO) on this page will allow you to see the receiv-
er's onscreen menu and a picture (valid signal) from the receiver should
it be switched to SD mode.
• The HD INPUT-AV 4 jacks are for standard RCA connectors. Your HD
receiver may use RCA or BNC output jacks. If your HD receiver comes
with BNC jacks, you will need to purchase BNC-to-RCA adapters to
connect the receiver to the TV. You should be able to purchase these
adapters at most stores that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.
BNC-to-
Adapter
• The HD INPUT-AV 4 jacks are compatible with some digital equipment
having RGB outputs with "sync on green" or RGB with "separate H and V
sync." Output standards for digital equipment, however, may vary by manu-
facturer. No industry standards have been established for HD television RGB
signal systems, timing, synchronization, and signal strengths. If the digital
equipment you want to connect to your TV offers both component video and
RGB outputs, component video is the suggested connection to use.
• The default color-space setting for the HD INPUT-AV 4 jacks is YPbPr.
RGB is also an option. If the picture color looks grossly incorrect, try
changing either the receiver's or TV's color space. See the receiver's
directions-for-use manual for information on setting its color space. Or
see page 59 in this manual for setting the TV's AV4 color space.
• AV4 and AV5 do not function with the PIP feature. They cannot be dis-
played in the PIP window, nor can the PIP window be displayed when
those signal sources are being viewed on the main screen.
14
HD INPUT -AV 4 J
Rear of TV
INPUT-AV 1
OUTPUT
INPUT-AV 2
1
Y
VIDEO
VIDEO
S-VIDEO
S-VIDEO
Pb
L
L
AUDIO
AUDIO
Pr
R
R
Coaxial Cable Lead-in
from Cable Outlet,
Cable Converter Box,
or VHF/UHF Antenna
H
H
ELPFUL
BNC
Adapter
Fitted to
RCA
Connector
Connection
ACKS
HD INPUT-AV 5
2
HD INPUT-AV 4
G/Y
R/Pr
2
B/Pb
V
L
L
SYNC
Coaxial Cable
AUDIO
AUDIO
H
R
R
Dish Antenna
3
3
INTS
OR
RCA
Connector
Lead-in
from
Satellite

Advertisement

Table of Contents
loading

This manual is also suitable for:

60pp935255pp93529946pp9352

Table of Contents