Remote Control Instruction - SimPal G4 User Manual

seconds to auto-exit.

3.7.1 Remote control instruction

There are three buttons on the remote control:
A. Arm SimPal camera :When
after 30 seconds delay arm. LED indicator constantly light in arm mode.
B. Disarm SimPal camera :When
indicator slowly flash green. Camera working in disarm mode.
C. Emergency button :When
Camera will sending images by e-mail immediately. When SIM card installed, it will
sending SMS to all numbers.
3.7.2 Removed remote control
Master user sends following SMS message in order to:
Remove all remote controls from the camera: #29#
30
SimPal-G4 Security Camera User Manual
is pressed, camera will beep and enter arm mode
is pressed, camera will beep twice and LED
is pressed, LED indicator rapidly flash in RED color.
(18)