How To Use Your Instant Steamer - Dash DIS001 Instruction Manual & Recipe Manual

Instant steamer
Table of Contents

Advertisement

USING YOUR INSTANT STEAMER

HOW TO USE YOUR INSTANT STEAMER

Do not touch the Baskets or Lid during operation as they will be hot and may cause
injury. Once steaming is complete, unplug the appliance and wait 5 minutes before
removing the Lid and the cooked food. Only remove the Lid by its Handle and wear
oven mitts to prevent personal injury when necessary.
Note: Before turning on the Steamer, make sure that the Baskets, Trays, and the Lid are
properly assembled and stacked so as to prevent steam escaping from areas other than
the Steam Vent. Never operate the Instant Steamer without all of the Baskets, Basket
Trays, or the Lid. All parts must be properly assembled before use.
12
1.
Place the Power Base on a clean, stable surface. Plug in
the power cord.
2.
Fill the Water Tank with clean, cold water, screw on the
Water Tank Cap, and place the Tank on the Water Tank
Mount. Make sure that the Water Level Pin is in place before
placing the Tank on the Base.
3.
Attach the stainless steel Basket Trays to Basket 2 and Basket
3, making sure that the tabs on the edges of the Basket Trays
snap into the notches on the bottom of each Basket.
4.
Place foods in the correct Baskets (see Steaming Chart
on page 15 for instructions on which Baskets are best for
certain foods and cooking times).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents