Table of Contents
Advertisement
Statement regarding improvements to 5100 Series Gaussmeters
The 5100 Series Gauss / Tesla Meters now have improved AC performance and several operational
improvements as a result of new DSP and microcontroller firmware.
Customers with meters manufactured prior to June 2007 and firmware versions below r2.00 and d2.00
should review this manual for changes in specifications. Certain operational sequences have been
made more intuitive and require fewer keystrokes. Refer to the appropriate section of the Operator's
Manual for details.
Summary of changes:
• Auto Relative now toggles On/Off with just 2 keystrokes.
• Settings for "HOLD" and "Probe Zero" are no longer retained when powered on/off. This often lead to
the false appearance that the meter was malfunctioning in previous firmware versions.
• Analog Output now automatically applies optimum filtering to the signal, therefore the options of "LO"
and "HI" have been removed and it is simply an On/Off selection.
• Peak Hold has been greatly improved with a shorter acquisition time.
USB Hub Compatibility
Like many USB devices on the market such as printers and digital cameras, operation of the 5180
with a USB hub may be problematic. It is recommended that customers wishing to make use of the
remote operation capabilities of the 5180 make a direct connection to their computer USB port and not
use a hub. Operation with a hub is not recommended.
Advertisement
Table of Contents
