Advertisement
Quick Links
CAUTION
- Only carry out the operations described in this manual.
- The installer is not authorized to remove the warranty seals or to access the interior parts of the products or accessories.
- The installer is not authorized to modify and/or adapt the product or the relative accessories.
- The manufacturer declines all liability for damage to persons and/or property caused by incorrect installation of the product.
DISCONNECT THE VEHICLE'S BATTERY
GENERAL LAYOUT
See pic. 5
SAT
PROGRAMMER
CONNECTOR
CONNECTIONS
PHASE
1
Fig.2
PHASE
2
Connect the connectors
to the terminal
Fig.3
SAT RC 09
INSTALLATION MANUAL
TECHNICAL SPECIFICATIONS
Dimensions and weight:....................................................................................
Power supply voltage:................................................................................................12 VDC
Temperature:..........................................................................................................-25º+70ºC
Power input*:.............................................................................................................<2mA
*With the peripheral device connected, the GPS off, Sat Programmer disconnected and the internal
buffer battery charged.
Maximum current:.............................................................................................................<210mA
PRESS
TO RELEASE
MAROON
+15
5A
+12
*
GND
* : MANDATORY
Lock the connector to the terminal by positioning the lever
as shown in the figure.
WARNING: make sure that the connector is inserted
and locked to the terminal in the correct way.
104X75X27, 168g
DARK BLUE
IGNITION
KEY POSITIVE
(+15)
BATTERY
POSITIVE
(+12V)
GROUND
Release and position the lever
as shown in the figure before
connecting the 18-pin loose
connector to the terminal.
EN
GPS
ANTENNA
GSM
ANTENNA
Fig.1
PHASE
3
Fig.4
Advertisement
Summary of Contents for Meta System SAT RC 09
-
Page 1: Installation Manual
SAT RC 09 INSTALLATION MANUAL CAUTION - Only carry out the operations described in this manual. - The installer is not authorized to remove the warranty seals or to access the interior parts of the products or accessories. - The installer is not authorized to modify and/or adapt the product or the relative accessories. - Page 2 CONNECTION CRASH SENSOR CLICK! CAUTION! CLICK! CHECK THE CORRECT CONNECTION Fig.5 HOW TO POSITION THE DEVICE • Position the device in a concealed part of the vehicle, inside the passenger compartment • To allow the diagnosis and testing operations to be carried out without difficulty, it is essential to install the device in a position where it can be easily reached with the cable of the Sat programmer.
- Page 3 OF THE APPROPRIATE FUNCTION (CONSULT THE RELATIVE MANUAL). Fig. 11 Meta System S.p.A. Model: SAT RC 09 FCC ID.: P3O97802 This device complies with Part 15 of the FCC rules subject to the following two conditions: 1) This device may not cause harmful interference.
- Page 4 R&T TE Dec la ra tion Of Co n fo r mit y (Do C) 0470 We: Meta System S.p.A. with the address: Via Majakovskij 10 b/c/d/e 42124 Reggio Emilia –Italy Declare Under own responsibility that the product: SAT RC 09 To which this declaration relates is in conformity with the essential requirements and other relevant requirements of the R&TTE Directive...