Table of Contents
Advertisement
Instruction
3.0 Installation of energy calculator
Make sure the energy calculatorv is installed sufficiently far away
from possible sources of electromagnetic interference (switches,
electric motors, fluorescent lamps, etc...)
The energy calculator should be installed in an accessible position
for service and operating personnel.
Initial operation is to be carried out and recorded after installation.
For medium temperatures of more than 90°C or if T
(for application as cooling meter or heat meter with cooling tariff ),
the calculator must be removed from the flow sensor and installed
a sufficient distance away from heat sources.
A wall holder (supplied with meter) or a space holder (optional) is
available for this purpose.
2
DEN-SMT/PL
INFOCAL 8
.
< T
water
T: 5 ... 90°C
T
> T
water
ambient
ambient
wall mounting
VI.SH.L1.02
T: 5 ... 130 / 150°C
T
< T
water
ambient
space holder
Danfoss District Enrgy
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the INFOCAL 8 and is the answer not in the manual?
Questions and answers