Auto Page RF-302 Operation Instructions Manual page 11

Enter the programming mode on vehicle #1 and push the ON/OFF
button on the transmitter for Vehicle #1. The alarm siren will respond
with a confirming chirp. Within five (5) seconds, push the AUX. button on
the transmitter for Vehicle #2. The alarm siren will respond with a
confirming chirp. Both transmitters are now programmed to Vehicle #1.
VEHICLE #2
Enter the programming mode on Vehicle #2 and push the AUX. button
on the first transmitter used for Vehicle #1. The alarm siren will respond
with a confirming chirp. Within five (5) seconds, push the ON/OFF button
on the second transmitter that had been previously programmed on
Vehicle #1. The alarm siren will respond with a confirming chirp. Both
transmitters are now programmed to Vehicle #2.
NOTE: Here, the first transmitter is assumed to be the primary
transmitter of Vehicle #1, and the second transmitter is assumed to be
the primary transmitter of Vehicle #2.
TRANSMITTER #1
TRANSMITTER #2
2. THREE VEHICLE OPERATION
Three vehicle operation is accomplished in the same manner as two
vehicle operation. Use the chart below to program three vehicles to
operate from one transmitter.
TRANSMITTER #1
TRANSMITTER #2
VEHICLE #1
ON/OFF BUTTON
AUX. BUTTON
VEHICLE #1
ON/OFF BUTTON
ON/OFF BUTTON
BOTH BUTTONS
VEHICLE #2
AUX. BUTTON
ON/OFF BUTTON
VEHICLE #2
AUX. BUTTON
BOTH BUTTONS
ON/OFF BUTTON
9
RF-302
VEHICLE #3
BOTH BUTTONS
AUX. BUTTON
AUX. BUTTON