Desktop add-on board. This contains a clock chip and a battery that tells the Raspberry
Pi what time it is. To ensure accuracy the time will need to be set on the system initially.
Note: Installing the software package then rebooting the system will enable the RTC.
FAQs
4)
4.7
My power control does not work. How do I fix this?
Install the software package first. Then reboot the system.
4.8
Can I use a third party power charger as the power supply?
To ensure stability use a power charger/supply that is rated with a minimum of 5V @ 2A.
Any power supply with current capacity under 2A may damage the file system and/or
hardware.
4.9
Do I have to have and SSD drive?
No, an SSD drive is not necessary.
5) Software Upgrade and Support
For upgrades and technical support please visit the PiDesktop Product Homepage:
www.element14.com/PiDesktop
6) Appendix
6.7
Electrical Characteristics
CHARACTERISTIC
Operating temperature
Storage temperature
Operating voltage
Power Consumption
Start-up process (Max)
V3.3
Element14 | element14.com/PiDesktop
VALUE
0~50°C
-40~80°C
5V
Value
1100mA
16
Need help?
Do you have a question about the DIY Pi Desktop and is the answer not in the manual?
Questions and answers