Element14 DIY Pi Desktop User Manual page 12

https://sourceforge.net/projects/ext2fsd/
To install the software you will need to have administrative rights on the computer
you're installing it onto, and the ability to install the required system drivers.
Afterwards you will likely have to reboot.
After you have connected the mSATA SSD HAT board to your computer, you will
see it in Windows device manager as a USB Mass Storage Device and also as a
drive:
From the start menu, you will want to open the 'Ext2Fsd' folder and then 'Ext2
Volume Manager':
From the software we can then see the partitions of all of the drives listed,
including the identified ext. FS:
V3.3
Element14 | element14.com/PiDesktop 12