Firmware Upgrade - Cablematic WPS User Manual

User's Manual
*** Another way to restore Factory Default Settings, Follow below
procedures.
1. Power off WPS.
2. On the rear panel, press [Reset] button and Hold.
3. Turn on WPS box.
4. Wait for over 10 seconds and relief [Reset] button.
5. It will take effect to restore factory default settings.

4.10. Firmware Upgrade

*** Click [Firmware Upgrade] button to upgrade firmware.
1. Firstly, you have to get latest firmware image file from your vendor.
2. Click <Browse> to specify file name you want to upgrade.
3. Click <Upgrade> to start.
4. A warning message shown and count down counter on the screen.
5. After a few minutes, a complete message shown on the screen.
21
- -