User’s Manual 1. Overview Wireless Presentation System is an easy installation, convenient operation and user friendly projecting device. It turns your current Projector into a high-end Projector. With the Wireless Presentation System your Projector become a wireless device and PC/Notebooks will be easier to project screen to Projector. Plug &...
Conference control function is provided for the host to moderate a meeting. Provide friendly web-based user interface for easy configuration. Support static-IP and DHCP server. 2. Quick Start 1) Connect projector VGA cable to WPS box VGA connector and turn on projector power. 2) Turn on WPS box.
Page 5
3) Make sure your PC WLAN is enabled already, and connect your PC with WPS box. 4) Open your browser and enter the IP address to get in WPS web home page. ♦ The default IP address of WPS is 192.168.100.10 or refers to the IP...
Page 6
User’s Manual 5) Click on “Download Software”, and execute the installation program. ♦ After install the program, WPS shortcut will come out on the PC screen.
User’s Manual 6) Make sure your personal firewall allows WPS software to pass through. 7) Enter the LOGIN CODE and ♦ You can see the login code on the projector screen 8) Click the “Play” button to start projection! 3. Client Utility 3.1 Starting Program...
User’s Manual 3) If WPS box founded then “Login Code” dialog box will be pop up on the PC screen. 4) If not, will enter to disconnected state and “Reconnect” button shown for you to try again. Searching for WPS box WPS box is founded and enter login code to start.
User’s Manual 3.3 Buttons Description 1) After login successfully, you will see main UI of WPS application. 2) Click following buttons to manipulate WPS Application. Presentation Mode Video Mode Start projecting Pause projecting Stop projecting Refresh projecting screen Server Login Code...
User’s Manual Start Playing Video Stop Playing Video Pause Playing video Open Video File Audio volume ON. Audio volume OFF Audio volume strength bar Video time bar While playing video, it will be blinking Function menu Minimize the program Exit the program 3.4 Start/Stop Presentation Click...
User’s Manual 3.5 Start/Stop Playing Video Click to switch to Video Mode. Click to open the video file and submit to play it. * Supported Video Format: MPG, MPEG, DAT, VOB, WMV9, ASF. 3.6 Open Admin Web Page Click to open function menu and select “Web Admin” management web page.
User’s Manual 3.8 Repeat Click “Repeat” to enable/disable video repeat capability. 3.9 System Information Click “Info” to show system information. It includes product model name, IP address and other information. 3.10 Exit Program Click to exit this program.
4.1. Home Page 1. Make sure your PC connect to WPS box successfully. 2. Open your browser, it will enter WPS home page automatically. 3. If not, enter your IP address on the browser, you can see the IP on the projector screen.
“Play” button and “Stop” button. 7. User List Computer Name: The name of PC connected to WPS box. Play control:Show current user’s projecting status. : Start projecting : Stop projecting. IP address:The IP address of PC...
6. Wire MAC address Connection Status: 1. Projecting status: which is “Waiting for projecting” or “Projecting” 2. Total Users: It shows how many users login into WPS box. 4.6. Network Setup There are many kinds of operating configurations as below.
Page 18
The default setting of the WPS box is DHCP client. When the WPS box is connected to a LAN that already has a DHCP server present, the WPS box takes an IP address assigned to it by the server. When the WPS box is connected to a LAN that does not have a DHCP server, the WPS box becomes the DHCP server in the network.
User’s Manual on WPS, it will scan all of wireless channel and select clear one channel automatically. ♦ WEP: you can Disable WEP key or select one of 64bit or 128bit in ASCII or HEX string. ♦ Key: If WEP is enabled, you have to set key value according to WEP mode you selected.
User’s Manual ♦ <Cancel>: Cancel all the modifications 4.8. Change Passwords *** Click [Change Password] button, to change password value. ♦ <Enter New Password>: enter new password you want to change for each category. ♦ <Confirm New Password>: double confirm new password. ♦...
1. Power off WPS. 2. On the rear panel, press [Reset] button and Hold. 3. Turn on WPS box. 4. Wait for over 10 seconds and relief [Reset] button. 5. It will take effect to restore factory default settings.
User’s Manual 6. Restart WPS box to take effect. Warning: Don’t power off WPS while firmware upgrade in progress, otherwise will cause your Box doesn’t work and have to return device to your vendor for fixing. 4.11. Reboot System *** Click [Reboot System] button, to restart system ♦...