Table of Contents
Advertisement
User's Manual
Auto-Configuration Network Setup
<
The default setting of the WPS box is DHCP client. When the WPS box is connected
to a LAN that already has a DHCP server present, the WPS box takes an IP address
assigned to it by the server. When the WPS box is connected to a LAN that does
not have a DHCP server, the WPS box becomes the DHCP server in the network.
< IP Setup>
♦
You can select "obtain IP address automatically" or "Use the following IP
address"
♦
IP Address: The default value is 192.168.100.10.
♦
Subnet Mask: The default value is 255.255.255.0
♦
Default Gateway: The default value is 192.168.100.10
<DHCP Server Setup>
♦
You can select "auto(Enable/Disable DHCP Server" or "Disable"
♦
Start IP: The start IP address of DHCP Server.
♦
End IP: The end IP address of DHCP Server.
< Wireless Setup>
♦
Region: default value is "Worldwide".
♦
SSID: SSID string, max. Length is 32 bytes.
♦
Channel: to set fixed channel or Auto. The "Auto" means after power
>
18
- -
Advertisement
Table of Contents
