Relay 1 (Ready) - BEL LDX-U20 User Manual

20

5.2.28 RELAY 1 (READY)

Used to configure the behavior of the Relay 1 contact. Click OK and then follow the instruction on the screen
to define the polarity and event associated with the relay. See §3.1.3 for more details.
5.2.29 RELAY 2 (BACKUP)
Used to configure the behavior of the Relay 2 contact. Click OK and then follow the instruction on the screen
to define the polarity and event associated with the relay. See §3.1.3 for more details.
5.3 INFO
While in the info menu, use the UP/DOWN KEY to navigate through the menu items.
5.3.1 FIRMWARE VERSION
Shows the current firmware version. Using the freely available POWERMASTER software is possible to
upgrade the firmware with the latest available version.
5.3.2 SERIAL
Shows the device serial number (S/N). This serial number corresponds to the S/N shown on the device label.
5.3.3 NAME
Shows the device name. Using the freely available POWERMASTER software is possible to modify the
device name. The default name is DCU-20.
5.3.4 POWER ON CYCLES COUNTER
Shows the Power ON cycles counter, which is incremented by 1 every time the device is powered ON.
USER MANUAL
tech.support@psbel.com
belfuse.com/power-solutions