Table of Contents
Advertisement
USER MANUAL
14
5 USER INTERFACE
Power ON screen:
This screen is shown at power ON. It shows the device name, serial
number and firmware version.
Status:
This is the default view where the user can find the most relevant
information about the device status. The system always falls back to
this view after 60s of inactivity (no key pressed).
Settings:
All the device settings are configurable from this menu. Use the UP/
DOWN KEY to navigate through the parameters. Press the OK KEY to
enter/exit the editing mode. In editing mode use the UP/DOWN KEY to
change the highlighted value.
Info:
Device information such as firmware version, serial number and device
name is visible from this menu.
Logs:
All the alarms and event are logged in a circular buffer and visible from
this screen. Use the UP/DOWN KEY to navigate through the logs.
Wizard:
The wizard helps the user to configure the system through a series of
screens.
Table 3. User interface layout
tech.support@psbel.com
belfuse.com/power-solutions
Advertisement
Table of Contents
