1. Manuals
  2. Brands
  3. D-Teg Manuals
  4. DVR
  5. BRX2004A
  6. User manual

D-Teg BRX2004A User Manual

Mobile digital video recorder
Hide thumbs Also See for BRX2004A:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
RSG ENGINEERING LIMITED
19 Hollies Business Park, Hollies Park Road, Cannock, Staffordshire WS11 1DB.
Telephone: 01543 438800 Fax: 01543 438801
Email:
sales@rsg-ontop.com
Web: www.rsg-ontop.com
VDR
USER GUIDE
VER 2.1.0
Thank you for purchasing this Mobile Digital Video Recorder.
Please ensure that you read and understand this USER GUIDE
and use it before connecting and installing this Recorder.
Please store the USER GUIDE in an easily accessible location.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BRX2004A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for D-Teg BRX2004A

Summary of Contents for D-Teg BRX2004A

  • Page 1 RSG ENGINEERING LIMITED 19 Hollies Business Park, Hollies Park Road, Cannock, Staffordshire WS11 1DB. Telephone: 01543 438800 Fax: 01543 438801 Email: sales@rsg-ontop.com Web: www.rsg-ontop.com USER GUIDE VER 2.1.0 Thank you for purchasing this Mobile Digital Video Recorder. Please ensure that you read and understand this USER GUIDE and use it before connecting and installing this Recorder.

  • Page 3: Safety Advice

    SAFETY ADVICE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Please make sure you follow the safety advice/instructions given in the user guide. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

  • Page 4: Gps Reception

    GPS Reception Activate the product in an area without large buildings to improve GPS reception. The commercial purpose GPS has the average range error of more than 15 meters and the range error could be more than 100 meters due to environm ental conditions like buildings, roadside trees etc.
  • Page 5 CONTENTS Each BRX2004A/2008A order includes the following items. 1. Main unit 7. Mini USB Cable 8. USER GUIDE 2. GPS module with waterproof case 9. DVR Viewer CD 3. Camera input cable 4. Power cable 10. Keys, Screws 5. Car signal cable 11.
  • Page 6 INTRODUCTION FRONT 12345 5 6 7 ① System Door Lock ② LED [POWER] : Green LED indicates power-on [REC] : Yellow LED indicates record-on [ALARM] : Red LED indicates Video loss or SSD/HDD failure. [LAN] : Yellow LED indicates network-on ③...
  • Page 7 INTRODUCTION FRONT ⑨ BUTTON [SER] : Searches the recorded data. [CH] : Changes the camera on display. (Camera 1 Camera 2 Camera 3 ->..->Camera 8 Camera 1) [ESC] : Cancels or exists from the selected modes or menus. [MENU] Enters into the menu. [FN] : Being used in combination with other buttons as follows;...
  • Page 8 INTRODUCTION REAR ① Power Connector Battery : Connects to the battery power in vehicle. ACC : Connects to the ignition power in vehicle. ② Car Signal Connector: left/right signals, brake, reverse, speed pulse signal ③ Serial Port S1 : For problem shooting (debugging) purpose S2(T) : Ready for interface to additional device S3 : Connect the provided GPS ④...

  • Page 9: Connection Diagram

    CONNECTION DIAGRAM...
  • Page 10 POWER ON 1. TURNING ON THE POWER ① Make sure that peripherals are properly connected. ② Switch「ON」the main power switch on the rear panel as below, Main Power Switch ③ Turn on the Removable HDD/SSD lock using key from [OFF] to [ON] as below, The front POWER LED will light up in green.

  • Page 11: Turning Off The Power

    POWER OFF 2. TURNING OFF THE POWER ① Turn off the Removable HDD/SSD lock using key from [ON] to [OFF] as below, The RECORD LED will be off immediately and the front POWER LED will be off in 15 seconds. [System shutdown pop-up window] ②...

  • Page 12: System Operation

    NOTE – To change default display Run DVR Viewer => Setting => Machine Config [New] or [OPEN] => Select Model BRX2008A or BRX2004A => Device => Default Layout Live display priority can be set in Event menu of the DVR Viewer.
  • Page 13 SYSTEM OPERATION LIVE DISPLAY ICONS Video Loss, No Camera Motion Detection Audio Record Continuous Record (RED) Event Record (YELLOW) Detect Alarm in 1 Detect Alarm in 2 Detect Alarm in 3 Detect Alarm in 4 Detect Alarm in 5 Detect Alarm in 6 Detect Alarm in 7 Detect Alarm in 8 Activate Alarm out 1...
  • Page 14 STATUS To turn off/on the status icons, Press [STA] button. Status [STA] Button shows, in sequence, the five status information, as below, 1. [All Icons] 2. [Without Icons] 3. [Without Icons, Camera titles] 4. [Without all icons] This information page shows the current system information such as firmware / micom version, GPS acceptance, Alarm In/Out,...

  • Page 15: Selecting The Menu

    MAIN MENU Press [MENU] button in front panel brings this screen. The on-screen menus allow you to check the configuration. Only few setting can change here, please use provided DVR Viewer to set up all the features of BRX. All setup data is safe from power loss and stored in the internal flash memory of DVR. 1.
  • Page 16 MAIN MENU CAMERA Brightness, Contrast of each channel can be configured in this menu. To change Video or Camera title, please use DVR Viewer. Press [ESC] button for returning to the previous mode. SIGNAL Speed pulse type and pulse standard can be configured in this menu. Press [ESC] button for returning to the previous mode.
  • Page 17 MAIN MENU G-SENSOR G-sensor calibration can be configured in this menu. G-SENSOR(X) 0, 90, 180, 270 -(Y) 0, 90, 180, 270 -(Z) 0, 90, 180, 270 [Example- Standard Installation] FRONT (X axis): Front sides of BRX and car must be in line, facing the front side. LEFT (Y axis): Left side of BRX must be facing the left side of car and BRX must be horizontal, parallel with the ground.
  • Page 18 MAIN MENU DISPLAY This menu is to check what is the Default display layout To change the Default live display, please use DVR Viewer. Press [ESC] button for returning to the previous mode. RECORD Recording conditions such as Frame Rate, Resolution and Image Quality can be checked. To change the Record set up, please use DVR Viewer.
  • Page 19 MAIN MENU To change the Resolution, Quality, Pre-recording time, Post-recording time, please use DVR Viewer. Change the channel and check the record set up per channel To change the Record Normal/Event, fps, audio on/off, please use DVR Viewer. Disk End Mode (Overwrite) ON/OFF To change the Disk End mode, please use DVR Viewer.
  • Page 20 MAIN MENU SYSTEM DATE/TIME/LANGUAGE and NTSC/PAL can be configured in this menu. Press [ESC] button for returning to the previous mode. DATE/TIME/LANGUAGE System time, Date format, Time format, Time zone, DST, GPS Time Synchronize can be configured in this menu.

  • Page 21: Permission Management

    MAIN MENU PERMISSION MANAGEMENT DVR ID, USER ID can be checked. To change the DVR ID, USER ID, please use DVR Viewer. DATE/TIME/LANGUAGE HDD Format, HDD recovery, Firmware upgrade, Factory Default can be done. Video standard (NTSC/PAL) can be set here. HDD Format time differs from the capacity of SSD/HDD.
  • Page 22 CONFIGURATION CONFIGURATION UPLOAD TO DVR The configuration file can be saved into a USB memory stick via DVR Viewer Software. Insert USB memory stick containing configuration file (set operation condition) to USB port in BRX. It may take around 5~10 seconds till USB memory is recognized. After then, press and hold [Fn] button &...
  • Page 23 SOFTWARE USER GUIDE BRX200A DVR Viewer Guide [PC SYSTEM REQUIREMENT] Recommended PC specifications for DVR Viewer software Windows XP, Windows Vista, Windows 7 Intel Core 2 Duo (2Ghz)or higher 1GB or higher VGA Memory 256MB or higher HDD Free space Install 120MB or higher Display 1,024 x 768 pixel/High Color(16bit) or higher...

  • Page 24: Installing Procedures

    INSTALLING PROCEDURES DVR Viewer software is on the provided CD. 1. Insert the CD into your PC and run [SETUP.EXE]. 2. Select the language and then follow the dialog box. 3. Continuously install EXt2Fsd driver. It’s necessary to read the removable HDD/SSD. 4.
  • Page 25 The “DVR Viewer” icon will be displayed on your desktop. Run DVR viewer. NOTE: To Un-install the “DVR Viewer BRX2004A” Open the “Control Panel” Select [Remove Program] and remove [DVR Viewer BRX2004A] To set the DVR Viewer itself, Click setting. setting This setting is for DVR Viewer itself.
  • Page 26 DVR CONFIGURATION SETTING To set the DVR configuration, Firstly, connect a USB memory stick into your PC’s USB slot. And Run “DVR Viewer BRX2000A” and click setting. setting And then click Machine config [NEW] Select your DVR model first, and then click OK. If you already have a DVR configuration in your memory stick, click [OPEN].
  • Page 27 DVR CONFIGURATION SETTING DEVICE Camera ON/OFF Select cameras connect Camera Cam Title The camera title can be up to 10 characters. Brightness Adjust Brightness of camera Contrast Adjust Contrast of camera Display Default layout Select default display layout. If you set 2x2, when you turn on the DVR quad screen will be on the screen.
  • Page 28 DVR CONFIGURATION SETTING G-Sensor Calibration If you install FRONT (X axis): Front sides of BRX and car must be in line, facing the front side. LEFT (Y axis): Left side of BRX must be facing the left side of car and BRX must be Z:0) horizontal, parallel with the ground.
  • Page 29 DVR CONFIGURATION SETTING F : Front RR : Rear Different installation 2 - BRX top is facing the ground. TOP : Top B : Bottom R : Right L : Left (X:180, Y:0, Z:0) (X:180, Y:0, Z:180) (X:180, Y:0, Z:90) (X:180, Y:0, Z:270) Different installation 3 Different installation 4...
  • Page 30 DVR CONFIGURATION SETTING Set G-Sensor Trigger level [1(insensitive)~5(The most sensitive)] If G-sensor sensitivity value is high (5), it may be too sensitive, it will detect even a light impact or light turn. If G-sensor sensitivity value is a low setting (1), it might not detect a notable incident.
  • Page 31 DVR CONFIGURATION SETTING RECORD Audio Record ON/OFF Video Type Select your Video Standard(Camera type.). This Video Standard(NTSC/PAL) is just for FPS calculation. This is different from your DVR video standard. To change your DVR video standard, set you r video standard at service menu of DVR. Refer to page 21.
  • Page 32 DVR CONFIGURATION SETTING Remained FPS Show remained FPS / Total FPS Resolution D1: 720x480(NTSC), 720x576(PAL) HD1: 720x240(NTSC), 720x288(PAL) CIF: 360x240 (NTSC), 360x288(PAL) Quality Normal: Small file size, low picture quality. High: Super: Large file size, good picture quality. Event R Pre-event-record time is 0~5sec.
  • Page 33 DVR CONFIGURATION SETTING EVENT Motion Detection To use motion detection as a Event, check the camera first. Sensitivity 1(Insensitive)~5(The most sensitive) Set Grid Default setting: All area is motion detecting area. To disable motion detect, click blocks and make it to black. Record CH Select motion event record channel Alarm out1...
  • Page 34 DVR CONFIGURATION SETTING Alarm Input To use Alarm In as a Event, check the alarm first. Title Set Alarm In title Type Set Alarm In Type Alarm In 1~4: Voltage ON / Voltage OFF. Alarm In 5~8: Normal Close / Normal Open Record CH Select Alarm record channel Alarm out1...
  • Page 35 DVR CONFIGURATION SETTING Signal Title Set Signal title Record CH Select Signal record channel Alarm out1 Set alarm out 1 duration from 0~ Alarm out2 Set alarm out 2 duration from 0~ Live out Set Live display channel Live out Set Live display duration.
  • Page 36 DVR CONFIGURATION SETTING G-Sensor / Speed GPS Speed Set GPS speed, Over this speed will trigger. Pulse Speed Set Car speed pulse speed, Over this speed will trigger. . Record CH Select speed triggered record channel Alarm out1 Set alarm out 1 duration from 0~ Alarm out2 Set alarm out 2 duration from 0~ Live out...
  • Page 37 DVR CONFIGURATION SETTING Live out Priority This menu is to set the default live display priority. 1 is the most priority display channel on the live screen. 2x2_1 : quad mode (cam1~cam4) 2x2_2 : quad mode (cam5~cam8) : 8 split mode (cam1~cam8) If you set 2x2_1 as 1 and turn on the DVR, the first screen will be always quad (Cam1~Cam4) mode.
  • Page 38 DVR CONFIGURATION SETTING SYSTEM Language Set your DVR language Date Format Set your DVR Date Format. Time Format Set your DVR Time Format Speed Format Set your DVR Speed Format Apply DST Set Daylight Saving Time Time Zone Set your Time zone Time Sync Set time synchronize time.
  • Page 39 Connect Removable HDD/SSD 1. Connect Removable SSD/HDD to your PC through provided USB mini cable. 2. Run “DVR Viewer BRX2000A” 3. Click [HDD load] icon. [HDD load] icon 4. Select HDD [NOTE] Up to 4 removable HDD/SSD can be connected to a PC at the same time. 5.
  • Page 40 Open data folder Use this button after you download the whole removable HDD data into a folder in your PC. If you copied all removable HDD files include folders into the [aaa] folder as below, click Open Data Folder button and then select [aaa] folder to open the data. select [aaa] folder And then click OK...

  • Page 41: Playback Screen

    Playback screen Camera title (Resolution) Date/Time Speed Pulse Speed/Signal/Google Map/Alarm In 1-8 Playback Control Slide Bar Buttons Playback can be controlled with the buttons in bottom left and Slide Bar helps easy movement to the required playback position or time. In case that the user wants to search the other date, click [Calendar Search] Button at the upper layer of screen.
  • Page 42 Main buttons / Playback control buttons Main Buttons HDD Load Calendar Search Print Image File Load Event Search Backup Close Data Privacy Set Backup List View Information Save Jpg Setting Select Layout Save Avi About Playback control Buttons Before Reverse Pause Play Next...
  • Page 43 Select Display layout Click [Select Layout] button and then window for layout selection appears. [Select Layout] button Window for layout selection Click this icon for returning to the previous screen. [Select Layout] button To see 1 camera only, double click screen. Or right-click on screen and select camera Return to multi-screen mode, double click screen.

  • Page 44: View Information

    View Information Click [View Information] button during playback. [View Information] button BRX can record not only video & audio data of 8 Channels but also useful driving information of vehicles such as GPS position, speed, left/right signal, brake signal and speed pulse & G-sensor information. In addition, 8 alarm inputs can be interfaced and trigger the recording, as well.

  • Page 45: Google Map

    Google map Click [Google map] button during playback. [Google map] button To see the route & position on the Google map, the GPS data should be recorded with video. To see the map, the PC must be connected to the Internet. Now Here The playback position will be shown on the map with an arrow.
  • Page 46 Multi Windows Main DVR viewer, Information Window and Google map Window can be displayed at the same monitor together and their size can be adjusted as per the application. 3 different windows can work as an integrated analysis software, which improves the efficiency of the security/fleet management.

  • Page 47: Calendar Search

    Calendar Search Click [Calendar Search] button during playback to search the other date. [Calendar Search] button Dates containing recorded data are to be marked with box of Orange color. Once the selected date is clicked, the hours containing recorded data are marke d with Orange color, too.

  • Page 48: Event Search

    Event Search Click [Event Search] button to search event quickly. [Calendar Search] button [Event Search] BRX can access to the data of G-Sensor Trigger, Car Signal Information, Alarm or speed with video/audio, which means that user can easily search and playback the classified data by the different conditions. This is the case of event search, the files of speed over 60Km GPS speed are listed like below;...

  • Page 49: Privacy Set

    Privacy Set BRX can set up the Privacy region at each channel to protect the people/informat ion from unnecessary disclosure to public. The set privacy region becomes invisible in case of back up the original data to J PG, AVI and export to any other report. Click [Privacy Set] button to set privacy region.
  • Page 50 Save Jpg / Save Avi Pause the playback and click [Save Jpg] button to make a JPG file. [Save Jpg] button Pause the playback and click [Save Avi] button to make a AVI file. [Save Avi] button...

  • Page 51: Print Image

    Print Image Pause the playback and click [Print Image] button to print out. [Print Image] button Type in the Title [Print Title] & any comments [Comment] using the Keyboard.
  • Page 52 Backup Click [Backup] button to backup the files to the PC. [Backup] button Type means a folder name. Need this to start backup. Type in the Memo Title & Memo using the Keyboard. And then set the Type (Folder name) and click start button.
  • Page 53 Backup List Search Click [Backup List] button to playback backup file. [Backup List] button Select Type to search. Under selected type, file list shows up with the information of time, DVR ID, USER ID. Select the required file and click [OK] Button.
  • Page 54 About Click [About] button to check the product information. [About] button Click [HotKey] tap to check the hot key (simplified button) for the functions of DV R Viewer Software.

  • Page 55: Specifications

    Specifications...
  • Page 56 RSG ENGINEERING LIMITED 19 Hollies Business Park, Hollies Park Road, Cannock, Staffordshire WS11 1DB. Telephone: 01543 438800 Fax: 01543 438801 Email: sales@rsg-ontop.com Web: www.rsg-ontop.com...

This manual is also suitable for:

Brx2008a

Table of Contents