How To Turn Off The Engine ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ 2; Working Techniques - Keyang KY-350S Manual

•HOW TO TURN OFF THE ENGINE
(1) Put the throttle lever in low speed position; and
make the engine in idling condition.
(2)When push the stop switch, engine gets stopped. Until the fuel
gets finished, never use the engine. When gets fuel finished
during working, it's very hard to get started for next operation.
•In case of emergency, you can turn off the engine by pushing the stop switch
•If the stop switch does not work, you can turn off the engine by pulling out the ignition plug cap.

•WORKING TECHNIQUES

Since the blade rotates left direction (counter clockwise
in upper view), It is more effective way to cut the grass
towards left side.
In case the blade hits hard object like stone etc, while rotating, turn off the engine and check if there is any crack on the
blade.
Tighten the blade and check if it makes any noise when shaken on turned by hand.
If the engine keeps in no use with fuel filled in tank for a long time, it can cause an impossible use due to get clogged with fuel
contaminates in the passway of the carburettor. Please remove the rest fuel from tank. With the condition of fuel cock closed,
please try to get the engine started or let the engine leave it until it gets stopped automatically. And please take out the fuel in carburettor.
low speed
(1)throttle lever
22
(2)stop switch