Regarding How To Assemble ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ 1 - Keyang KY-350S Manual

2. ASSEMBLY
•REGARDING HOW TO ASSEMBLE
1.
How to assenble the drive shaft tube and flexible shaft hose.
Keyang brush cutter is separated in 3 different parts at large; Main body(Engine part), Flexible shaft hose part
and Working bar. Please assemble as following order and technigues.
Groove(Drive shaft tube side)
Before assembling the flexible shaft hose and main body, please remove the cap A and B; when keep in store
by separated, please cover the caps.
Drive shaft tube
After removing the bolt by L wrench, please push in the
elastic shaft into connector; and then set the bolt as well.
※After connection, be sure to check if the flexible shaft hose and drive
shaft tube are well set each other by pulling. (If too much tight set, it
might cause broken the unit.).
~
Cap A
L type wrench
C o n n e c t o r
Hexagonal bolt
After assembling, be sure to check the connecting condition once more.
Flexible shaft hose
Flexible shaft
14
Hole(Engine side)
Cap B