Bulbs – License Plate Lighting - Volvo V60 Owner's Manual

PRACTICAL INFORMATION
Bulbs – license plate lighting
The license plate lighting is located next to the
tailgate handle.
1. Remove the screws with a screwdriver.
2. Carefully detach the entire bulb housing and
pull it out.
3. Replace the bulb.
4. Reinsert the entire bulb housing and tighten
the screws.
Related information
•
Bulbs – specifications (p. 123)
122
Bulbs – cargo area lighting
The cargo area light is located in the ceiling
liner.
1. Insert a screwdriver and gently turn so that
the bulb housing comes loose.
2. Replace the bulb.
3. Check that the bulb illuminates and press it
back into the bulb housing.
Related information
•
Bulbs – specifications (p. 123)
Bulbs – vanity mirror lighting
The vanity mirror bulbs are located behind the
lens.
Removing the lens
1. Insert a screwdriver underneath the side of
the lens and carefully pry up the lug on the
edge.
2. Carefully detach and lift out the lens.
3. Use needle nose pliers to pull the bulb
straight to the side. Replace the bulb. Do not
exert too much pressure on the bulb with the
pliers to help avoid damaging it.
Reinstalling the lens
1. Put the lens back into position.
2. Press it into place.
Related information
•
Bulbs – specifications (p. 123)