Inserting/Removing Remote Key - Volvo V60 Owner's Manual

PRACTICAL INFORMATION

Inserting/removing remote key

The remote key is used to start the engine or to
use various electrical functions without starting
the engine.
Inserting and removing the remote key
Ignition slot with remote key and START/STOP
ENGINE button.
Inserting the remote key
Holding the end of the remote key with the base
of the key blade, insert the remote key into the
ignition slot as shown in the illustration and press
it in as far as possible.
CAUTION
Foreign objects in the ignition slot can impair
function or cause damage.
Not necessary in vehicles with the optional keyless drive.
1
64
Removing the remote key
The remote key can be removed from the ignition
slot by pulling it out.
Related information
•
Ignition modes (p. 65)
1
Alarm-related functions
The following is general information regarding
the alarm system in your vehicle.
Automatic re-arming
If the doors are unlocked, the locks will automati-
cally re-engage (re-lock) and the alarm will re-
arm after 2 minutes unless a door or the tailgate
has been opened.
Remote key not functioning
If the remote key is not functioning properly, the
alarm can be turned off and the vehicle can be
started as follows:
1. Open the driver's door with the key blade.
> This will trigger the alarm.